Quality optimization and equivalence evaluation of radiographic digital images of aluminum alloy welds in launch vehicles
ID：177
Submission ID：222 View Protection：ATTENDEE
Updated Time：2024-10-23 10:02:36 Hits：126
Poster Presentation
Start Time：Pending （Asia/Shanghai）
Duration：Pending
Session：[No Session] » [No Session Block]
No files
Abstract
Aiming at the problem of unclear influence of technological parameters on image quality in digital radiography of welds in carrier rocket storage tanks, 6mm(transillumination thickness)fusion welds/friction stir welds were taken as the research object. The influences of tube voltage, exposure, focus size, magnification, pixel size, integral noise reduction frame number on image sensitivity, normalized signal-to-noise ratio and spatial resolution were analyzed, which provided theoretical basis of guiding the optimization of detection process. On the basis of this, digital radiography and film photography were performed on the welds of the storage tank, and the differences in defect morphology, size, distribution, and other aspects were compared and analyzed. The results show that the image sensitivity, spatial resolution, and normalized signal-to-noise ratio of 6mm welds digital radiography results are better than the A-level technical requirements. The detection results are basically consistent with the film photography detection results, and the size measurement error is less than 3%.
Keywords
carrier rocket,welds of tank,digital Radiography,quality of images,equivalence
Speaker
wangwenqiang
Engineer Shanghai Spaceflight Precision Machinery InstituteSubmission Author
All comments
15th August 2024 31st August 2024- Manuscript Submission
15th September 2024 - Acceptance Notification
1st October 2024 - Camera Ready Submission
1st October 2024 – Early Bird Registration
Contact Us
Website:
https://icsmd2024.aconf.org/
Comment submit